A lot has changed since the standard USB 2.0 flash drive that everyone owned since its release in the early 2000. It now has a newer version, the USB 3.0. They’re still great and all. But the problem with them is that connecting devices together is not possible. You have to connect to a computer in order to gain access to the USB drive and what’s inside. Now, things have definitely changed. What’s impossible before is no longer the case today. The USB OTG (On-The-Go) is the answer to this dilemma.
It’s not just about inter connectivity of the two devices. USB OTG also allows you to take control of everything using a single device, which may be anything. By enabling your smart phone (for the sake of an example) as the host, you can now use a dozen of peripheral devices including keyboards, mouse, musical instruments and even a game pad! There’s no limit to the numbers of hardware you can connect to a device using USB On-The-Go. This gives more power to your gadgets, you smart phone being the case here.
There are quite a few reasons why you should own a USB OTG flash drive. The most obvious is for added storage.
USB OTG Flash Drive is a boon for all those smartphone users, which don’t have a memory card slot. The micro-USB connector this USB OTG carries can connect these devices to most of the smartphones. Users can hence use this additional storage on their mobile phones. Like already mentioned, the best part of this feature is that you no longer have to depend on the cloud services to back up the data on your mobile phones or computers.
Another one is because of its differing roles. A USB OTG has more than just one function.
USB OTG Flash Drive can help you set communications between two USB peripherals. With the USB OTG each of the USB peripherals including your smartphones can interchangeably used as the host or slave. For instance, when you connect this USB OTG device to a mobile phone it can act as the host and read data present in this flash drive, while when connected to a computer it offers itself as a USB Mass Storage Device.
So is the case with a printer which prints based on the instructions from the computer acting as a slave and when the USB storage device is connected directly in absence of computer, it becomes the host and takes control over reading what’s present in the USB device and printing as per requirement. Hence direct connection between OTG Flash devices can also be established.
What if you’re told that your device’s battery can be preserved? Wouldn’t that just be great?
It is very common fact that devices can get charged up using their USB ports. The extra benefit that a USB OTG Flash Drive is that it hold charge and thus can be specifically used as a charger while you are on the go. Still the application of the USB OTG Flash Drive is under development and you can be sure to have this update any time soon.
It is compatible with many devices.
The employed USB 3.0 can be used on the USB 2.0 ports because of its backward compatibility. But with just the USB 2.0 transfer speeds. When it comes to smartphones, it is compatible to a wider range of devices including all the latest models.
Compared to wireless transfer, transfer using a physical drive is just much better.
There is no doubt in saying this technology is indeed much better than the wireless data transfer. The wireless technology tends to get a little too slow and creepy with increasing amounts of data to be transferred. But with an USB OTG Flash Drive you wouldn’t even have to be a tad concerned about it.
Whether you agree with owning an OTG drive is helpful or not, you will agree that backup storage is necessary. Getting your files backed up is a must. However, if your files on your laptop and hard drives need recovering, laptop hard drive recovery can be done to recover them.